| 1 |
Compression Behavior and Failure Mechanisms of Bionic Porous NiTi Structures Built via Selective Laser Melting |
|
|
| Xiaolong Zhang, Yue Jiang, Shupeng Wang, Shuo Wang, Ziqiang Wang, Zhenglei Yu, Zhihui Zhang, Luquan Ren |
|
| Acta Metallurgica Sinica (English Letters). 2023; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 2 |
How Advancement in Bone Science Should Inform the Examination and Treatment of Femoral Shaft Bone Stress Injuries in Running Athletes |
|
|
| Eric J. Hegedus, Edward P. Mulligan, Bradley A. Beer, Angela Spontelli Gisselman, Liana C. Wooten, Benjamin D. Stern |
|
| Sports Medicine. 2023; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 3 |
Halloysite nanoclay reinforced hydroxyapatite porous scaffold for hard tissue regeneration |
|
|
| Umakant Yadav, Vivek Verma |
|
| Journal of the Mechanical Behavior of Biomedical Materials. 2023; : 105626 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 4 |
Machine Learning-Enabled Optimization of Interstitial Fluid Collection via a Sweeping Microneedle Design |
|
|
| Ceren Tarar, Erdal Aydin, Ali K. Yetisen, Savas Tasoglu |
|
| ACS Omega. 2023; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 5 |
3D Printing of Bone Substitutes Based on Vat Photopolymerization Processes: A Systematic Review |
|
|
| Simon Enbergs, Jacob Spinnen, Tilo Dehne, Michael Sittinger, Catherine K. Kuo |
|
| Journal of Tissue Engineering and Regenerative Medicine. 2023; 2023: 1 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 6 |
Biomechanical analysis of variants of spinopelvic fixation of longitudinal sacral fractures by the finite element method |
|
|
| A. A. Kuleshov, N. A. Aganesov, M. S. Vetrile, A. V. Dol, I. N. Lisyansky, S. N. Makarov |
|
| Hirurgiâ pozvonocnika (Spine Surgery). 2023; 20(1): 28 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 7 |
Mechanical Properties of a Bone-like Bioceramic–Epoxy-Based Composite Material with Nanocellulose Fibers |
|
|
| Young-Seong Kim, Jin Woo Baek, Zhengyun Jin, Hee Chang Jeon, Min-Woo Han, Joong Yeon Lim |
|
| Materials. 2023; 16(2): 739 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 8 |
3D Printed Composite Scaffolds in Bone Tissue Engineering: A Systematic Review |
|
|
| Sadra Mohaghegh, Seyedeh Fatemeh Hosseini, Maryam Rezai Rad, Arash Khojasteh |
|
| Current Stem Cell Research & Therapy. 2022; 17(7): 648 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 9 |
A review on properties of magnesium-based alloys for biomedical applications |
|
|
| Pradipta Kumar Rout, Sudesna Roy, Sourav Ganguly, Dinesh Kumar Rathore |
|
| Biomedical Physics & Engineering Express. 2022; 8(4): 042002 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 10 |
Cu ions and cetyltrimethylammonium bromide loaded into montmorillonite: a synergistic antibacterial system for bone scaffolds |
|
|
| Li Yu, Tiantian He, Jia Yao, Wendi Xu, Shuping Peng, Pei Feng, Cijun Shuai |
|
| Materials Chemistry Frontiers. 2022; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 11 |
Assessing biocompatibility & mechanical testing of 3D-printed PEEK versus Milled PEEK |
|
|
| Neil Limaye, Lorenzo Veschini, Trevor Coward |
|
| Heliyon. 2022; : e12314 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 12 |
Direct ink writing of porous Fe-HA metal-matrix composites (MMCs) with independently adjustable porosity and degradation rate for bone implant applications |
|
|
| Chao Xu, Mingyang Ban, Hongye Zhang, Qingping Liu, Luquan Ren |
|
| Materials & Design. 2022; : 111319 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 13 |
Effect of stitching on improving the tensile strength of sisal fabric/epoxy composites for internal bone plate applications |
|
|
| Nalla Mohamed M, Sakthivel G. VR. |
|
| Materials Today: Proceedings. 2022; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 14 |
Extensive cell seeding densities adaptable SF/PGA electrospinning scaffolds for bone tissue engineering |
|
|
| Yi-tong Yao, Xiao-shi Jia, Shu-min Chen, Juan Zhong, Xiao-dong Wang, Qi-mei Gong, Yutao Jian, Ke Zhao |
|
| Biomaterials Advances. 2022; : 212834 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 15 |
Divergent mechanical properties of older male femora identified by latent profile analysis reveal morphological and compositional traits contributing uniquely to low strength |
|
|
| Morgan W. Bolger, Genevieve E. Romanowicz, Erin M.R. Bigelow, Ferrous S. Ward, Antonio Ciarelli, Karl J. Jepsen, David H. Kohn |
|
| Bone. 2022; : 116481 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 16 |
Effect of Zinc and Bio-Glass Addition on Mechanical Properties and Corrosion Behavior of Magnesium-Based Composites for Orthopedic Application: A Preliminary Study |
|
|
| K. V. Sandeep Moudgalya, Prithivirajan Sekar, H. Suresh Hebbar, M. R. Rahman |
|
| Journal of Materials Engineering and Performance. 2022; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 17 |
Fused deposition modelling (FDM) process parameter optimization to minimize residual stresses of 3?d printed carbon fiber nylon 12?hip joint implant |
|
|
| G. Nyiranzeyimana, J.M. Mutua, T. Ochuku Mbuya, B.R. Mose, E. Bisengimana |
|
| Materialwissenschaft und Werkstofftechnik. 2022; 53(10): 1184 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 18 |
Plasma immersion ion-implanted 3D-printed PEEK bone implants: In vivo sheep study shows strong osseointegration |
|
|
| Hedi V. Kruse, William T. Lewin, Natalka Suchowerska, D. S. Abdullah Al Maruf, Kai Cheng, Jonathan R. Clark, David R. McKenzie |
|
| Plasma Processes and Polymers. 2022; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 19 |
Novel 3D Bioglass Scaffolds for Bone Tissue Regeneration |
|
|
| Evangelos Daskalakis, Boyang Huang, Cian Vyas, Anil Ahmet Acar, Ali Fallah, Glen Cooper, Andrew Weightman, Bahattin Koc, Gordon Blunn, Paulo Bartolo |
|
| Polymers. 2022; 14(3): 445 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 20 |
Compressive Strength Characteristics of Long Tubular Bones after Hyperthermal Ablation |
|
|
| Denis Pakhmurin, Viktoriya Pakhmurina, Alexander Kashin, Alexey Kulkov, Igor Khlusov, Evgeny Kostyuchenko, Ivan Sidorov, Ilya Anisenya |
|
| Symmetry. 2022; 14(2): 303 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 21 |
Fabrication of 3D Printed Poly(lactic acid)/Polycaprolactone Scaffolds Using TGF-ß1 for Promoting Bone Regeneration |
|
|
| Cheng-Hsin Cheng, Ming-You Shie, Yi-Hui Lai, Ning-Ping Foo, Mon-Juan Lee, Chun-Hsu Yao |
|
| Polymers. 2021; 13(21): 3731 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 22 |
Development of Hot-Melt Extrusion Method to Produce Hydroxyapatite/Polycaprolactone Composite Filaments |
|
|
| Filip Zavrel,Matej Novák,Jirina Kroupová,Celine Beveridge,František Štepánek,Gabriela Ruphuy |
|
| Advanced Engineering Materials. 2021; : 2100820 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 23 |
Multifaceted Design and Emerging Applications of Tissue Adhesives |
|
|
| Zhenwei Ma,Guangyu Bao,Jianyu Li |
|
| Advanced Materials. 2021; : 2007663 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 24 |
Effect of zinc-doped hydroxyapatite/graphene nanocomposite on the physicochemical properties and osteogenesis differentiation of 3D-printed polycaprolactone scaffolds for bone tissue engineering |
|
|
| Hossein Maleki-Ghaleh,M. Hossein Siadati,Ali Fallah,Ali Zarrabi,Ferdows Afghah,Bahattin Koc,Elaheh Dalir Abdolahinia,Yadollah Omidi,Jaleh Barar,Ali Akbari-Fakhrabadi,Younes Beygi Khosrowshahi,Khosro Adibkia |
|
| Chemical Engineering Journal. 2021; : 131321 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 25 |
Fabrication of a porous hydroxyapatite scaffold with enhanced human osteoblast-like cell response via digital light processing system and biomimetic mineralization |
|
|
| Yong Sang Cho,Soyoung Yang,Eunchang Choi,Kyu Hyung Kim,So-Jung Gwak |
|
| Ceramics International. 2021; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 26 |
Influence of the fixation technique on the mechanical properties of human cancellous bone of the femoral head |
|
|
| Benjamin Fischer,Alexander Hofmann,Sascha Kurz,Melanie Edel,Dirk Zajonz,Andreas Roth,Stefan Schleifenbaum |
|
| Clinical Biomechanics. 2021; : 105280 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 27 |
Porous tantalum structure integrated on Ti6Al4V base by Laser Powder Bed Fusion for enhanced bony-ingrowth implants: In vitro and in vivo validation |
|
|
| Pengfei Lei,Hu Qian,Taomei Zhang,Ting Lei,Yihe Hu,Chao Chen,Kechao Zhou |
|
| Bioactive Materials. 2021; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 28 |
On structure and mechanics of biomimetic meta-biomaterials fabricated via metal additive manufacturing |
|
|
| Maryam Tilton,Alireza Borjali,Aaron Isaacson,Kartik Mangudi Varadarajan,Guha P. Manogharan |
|
| Materials & Design. 2021; : 109498 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 29 |
New resorbable Ca-Mg-Zn-Yb-B-Au alloys: structural and corrosion resistance characterization |
|
|
| Dawid Szyba, Anna Bajorek, Dorota Babilas, László Temleitner, Dariusz Lukowiec, Rafal Babilas |
|
| Materials & Design. 2021; : 110327 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 30 |
Fabrication and characterization of composite PMMA/HA scaffold using freeze casting method |
|
|
| Gurdev Singh,Soundarapandian Santhanakrishnan |
|
| Materials Technology. 2021; : 1 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 31 |
Truss Implant Technology™ for Interbody Fusion in Spinal Degenerative Disorders: Profile of Advanced Structural Design, Mechanobiologic and Performance Characteristics |
|
|
| Jessee P. Hunt,Matthew R. Begley,Jon E. Block |
|
| Expert Review of Medical Devices. 2021; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 32 |
In vitro evaluation of electrochemically bioactivated Ti6Al4V 3D porous scaffolds |
|
|
| Alexandr Myakinin,Amanzhol Turlybekuly,Alexander Pogrebnjak,Adam Mirek,Mikhael Bechelany,Iryna Liubchak,Oleksandr Oleshko,Yevheniia Husak,Viktoriia Korniienko,Katarzyna Lesniak-Ziólkowska,Dmitry Dogadkin,Rafal Banasiuk,Roman Moskalenko,Maksym Pogorielov,Wojciech Simka |
|
| Materials Science and Engineering: C. 2021; 121: 111870 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 33 |
Development of Digital Twins to Optimize Trauma Surgery and Postoperative Management. A Case Study Focusing on Tibial Plateau Fracture |
|
|
| Kévin Aubert,Arnaud Germaneau,Michel Rochette,Wenfeng Ye,Mathieu Severyns,Maxime Billot,Philippe Rigoard,Tanguy Vendeuvre |
|
| Frontiers in Bioengineering and Biotechnology. 2021; 9 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 34 |
Improvement of Mechanical and Biological Properties of PLA/HNT Scaffolds Fabricated by Foam Injection Molding: Skin Layer Effect and Laser Texturing |
|
|
| M. Eryildiz, M. Altan, S. Odabas |
|
| International Polymer Processing. 2021; 36(5): 564 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 35 |
Calcium Aluminate Cement Blends Containing Bioactive Glass and Strontium for Biomaterial Applications |
|
|
| A.M. Barbosa,K.W. dos Santos,I. S. Gonçalves,P.M.S.C.M. Leite,A.S. Martorano,G. Grisote,L.M.S. Castro-Raucci,P.T. de Oliveira,L. Raniero,I.R. Oliveira |
|
| Materials Research. 2021; 24(6) |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 36 |
Carbon Nanotubes: Smart Drug/Gene Delivery Carriers |
|
|
| Hossein Zare,Sepideh Ahmadi,Amir Ghasemi,Mohammad Ghanbari,Navid Rabiee,Mojtaba Bagherzadeh,Mahdi Karimi,Thomas J Webster,Michael R Hamblin,Ebrahim Mostafavi |
|
| International Journal of Nanomedicine. 2021; Volume 16: 1681 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 37 |
A Review on Biphasic Calcium Phosphate Materials Derived from Fish Discards |
|
|
| Liviu Duta, Gabriela Dorcioman, Valentina Grumezescu |
|
| Nanomaterials. 2021; 11(11): 2856 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 38 |
Prospect of Metal Ceramic (Titanium-Wollastonite) Composite as Permanent Bone Implants: A Narrative Review |
|
|
| Lohashenpahan Shanmuganantha,Azmi Baharudin,Abu Bakar Sulong,Roslinda Shamsudin,Min Hwei Ng |
|
| Materials. 2021; 14(2): 277 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 39 |
Thermo-Mechanical Behaviour of Human Nasal Cartilage |
|
|
| Aureliano Fertuzinhos,Marta A. Teixeira,Miguel Goncalves Ferreira,Rui Fernandes,Rossana Correia,Ana Rita Malheiro,Paulo Flores,Andrea Zille,Nuno Dourado |
|
| Polymers. 2020; 12(1): 177 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 40 |
Manipulating Air-Gap Electrospinning to Create Aligned Polymer Nanofiber-Wrapped Glass Microfibers for Cortical Bone Tissue Engineering |
|
|
| Houston R. Linder,Austin A. Glass,Delbert E. Day,Scott A. Sell |
|
| Bioengineering. 2020; 7(4): 165 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 41 |
The Possibility of Interlocking Nail Fabrication from FFF 3D Printing PLA/PCL/HA Composites Coated by Local Silk Fibroin for Canine Bone Fracture Treatment |
|
|
| Siwasit Pitjamit,Kittiya Thunsiri,Wasawat Nakkiew,Tunchanok Wongwichai,Peraphan Pothacharoen,Wassanai Wattanutchariya |
|
| Materials. 2020; 13(7): 1564 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 42 |
Biomimetic Design for a Dual Concentric Porous Titanium Scaffold with Appropriate Compressive Strength and Cells Affinity |
|
|
| Han Lee,Jiunn-Der Liao,Yao-Sheng Guo,Yung-Der Juang |
|
| Materials. 2020; 13(15): 3316 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 43 |
Interpenetrating polymer network hydrogels as bioactive scaffolds for tissue engineering |
|
|
| Cody O. Crosby,Brett Stern,Nikhith Kalkunte,Shahar Pedahzur,Shreya Ramesh,Janet Zoldan |
|
| Reviews in Chemical Engineering. 2020; 0(0) |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 44 |
Mechanical properties of zirconia ceramics biomimetically coated with calcium deficient hydroxyapatite |
|
|
| Jelena Macan,Maja Dutour Sikiric,Marco Deluca,Raul Bermejo,Carmen Baudin,Milivoj Plodinec,Krešimir Salamon,Miran Ceh,Andreja Gajovic |
|
| Journal of the Mechanical Behavior of Biomedical Materials. 2020; : 104006 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 45 |
Comparative study on biodegradation and biocompatibility of multichannel calcium phosphate based bone substitutes |
|
|
| Hoe-Jin Kang,Preeti Makkar,Andrew R. Padalhin,Gun-Hee Lee,Soo-Bin Im,Byong-Taek Lee |
|
| Materials Science and Engineering: C. 2020; : 110694 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 46 |
Design and additive manufacturing of porous titanium scaffolds for optimum cell viability in bone tissue engineering |
|
|
| Bingbing Li, Bani Davod Hesar, Yiwen Zhao, Li Ding |
|
| Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2020; : 0954405420 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 47 |
Patient-specific finite element model to evaluate the influence of the type of stabilization on the patientćs continuation of life after tibial plateau fractures |
|
|
| Kévin Aubert,Arnaud Germaneau,Wenfeng Ye,Michel Rochette,Philippe Rigoard,Tanguy Vendeuvre |
|
| Computer Methods in Biomechanics and Biomedical Engineering. 2020; 23(sup1): S20 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 48 |
Micromechanisms of Cortical Bone Failure Under Different Loading Conditions |
|
|
| N. K. Sharma,Swati Sharma,Apoorv Rathi,Abhinav Kumar,Karan Vir Saini,M. D. Sarker,Saman Naghieh,Liqun Ning,Xiongbiao Chen |
|
| Journal of Biomechanical Engineering. 2020; 142(9) |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 49 |
Development prospects of curable osteoplastic materials in dentistry and maxillofacial surgery |
|
|
| A.V. Vasilyev,V.S. Kuznetsova,T.B. Bukharova,T.E. Grigoriev,YuD. Zagoskin,M.V. Korolenkova,O.A. Zorina,S.N. Chvalun,D.V. Goldshtein,A.A. Kulakov |
|
| Heliyon. 2020; 6(8): e04686 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 50 |
3D printed composite materials for craniofacial implants: current concepts, challenges and future directions |
|
|
| Swati Jindal,Faisal Manzoor,Niall Haslam,Elena Mancuso |
|
| The International Journal of Advanced Manufacturing Technology. 2020; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 51 |
Reinforcement and Fatigue of a Bioinspired Mineral–Organic Bioresorbable Bone Adhesive |
|
|
| Alina Kirillova,Olivia Nillissen,Samuel Liu,Cambre Kelly,Ken Gall |
|
| Advanced Healthcare Materials. 2020; : 2001058 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 52 |
Compositions of calcium aluminate cement containing gold and silver nanoparticles for biomaterial applications |
|
|
| A. F. L. Santos,M. L. Castilho,T. S. Veriato,I. R. Oliveira,L. Raniero |
|
| Research on Biomedical Engineering. 2020; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 53 |
Development of Ag nanoparticles on the surface of Ti powders by chemical reduction method and investigation of their antibacterial properties |
|
|
| L. Somlyai-Sipos,P. Baumli,A. Sycheva,G. Kaptay,E. Szori-Dorogházi,F. Kristály,T. Mikó,D. Janovszky |
|
| Applied Surface Science. 2020; : 147494 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 54 |
Bone Quality is Dependent on the Quantity and Quality of Organic–Inorganic Phases |
|
|
| Yunhua Luo,Xinyi Wu |
|
| Journal of Medical and Biological Engineering. 2020; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 55 |
Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen scaffolds for hard tissue engineering |
|
|
| Mehmet O. Aydogdu,Bilcen Mutlu,Mustafa Kurt,Ahmet T. Inan,Serap E. Kuruca,Gökçe Erdemir,Yesim M. Sahin,Nazmi Ekren,Faik N. Oktar,Oguzhan Gunduz |
|
| Journal of the Australian Ceramic Society. 2019; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 56 |
Additively Manufactured Multiphasic Bone–Ligament–Bone Scaffold for Scapholunate Interosseous Ligament Reconstruction |
|
|
| Hayman Lui,Randy Bindra,Jeremy Baldwin,Saso Ivanovski,Cedryck Vaquette |
|
| Advanced Healthcare Materials. 2019; : 1900133 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 57 |
3D bio-printing of Levan/Polycaprolactone/Gelatin blends for bone tissue engineering: characterization of the cellular behavior |
|
|
| Busra Tugce Duymaz,Fatma Betul Erdiler,Tugba Alan,Mehmet Onur Aydogdu,Ahmet Talat Inan,Nazmi Ekren,Muhammet Uzun,Yesim Muge Sahin,Erdi Bulus,Faik Nüzhet Oktar,Sinem Selvin Selvi,Ebru ToksoyOner,Osman Kilic,Muge Sennaroglu Bostan,Mehmet Sayip Eroglu,Oguzhan Gunduz |
|
| European Polymer Journal. 2019; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 58 |
3D inkjet printing of biomaterials with strength reliability and cytocompatibility: Quantitative process strategy for Ti-6Al-4V |
|
|
| Srimanta Barui,Asish K. Panda,S. Naskar,R. Kuppuraj,Saptarshi Basu,Bikramjit Basu |
|
| Biomaterials. 2019; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 59 |
Investigation of the structure and mechanical properties of additively manufactured Ti-6Al-4V biomedical scaffolds designed with a Schwartz primitive unit-cell |
|
|
| Nicolas Soro,Hooyar Attar,Xinhua Wu,Matthew S. Dargusch |
|
| Materials Science and Engineering: A. 2019; 745: 195 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 60 |
Structural and electrochemical study of resorbable Ca32Mg12Zn38Yb18-xBx (x=1, 2, 3) metallic glasses in Ringerćs solution |
|
|
| Dawid Szyba,Rafal Babilas |
|
| Journal of Alloys and Compounds. 2019; : 152313 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 61 |
3D laser-printed porous Ti6Al4V dental implants for compromised bone support |
|
|
| Che Chang Tu,Pei-I Tsai,San-Yuan Chen,Mark Yen-Ping Kuo,Jui-Sheng Sun,Jenny Zwei-Chieng Chang |
|
| Journal of the Formosan Medical Association. 2019; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 62 |
Effect of structural hybrid design on mechanical and biological properties of CoCr scaffolds fabricated by selective laser melting |
|
|
| Emre Özeren,Mirigul Altan |
|
| Rapid Prototyping Journal. 2019; 26(4): 615 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 63 |
Fabrication of dense and porous biphasic calcium phosphates: Effect of dispersion on sinterability and microstructural development |
|
|
| Mehdi Mohammadi,Jean-Marc Tulliani,Paola Palmero |
|
| International Journal of Applied Ceramic Technology. 2019; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 64 |
Setting behavior and bioactivity assessment of calcium carbonate cements |
|
|
| Jesús Rodríguez-Sánchez,Barbara Myszka,Aldo Roberto Boccaccini,Dag Kristian Dysthe |
|
| Journal of the American Ceramic Society. 2019; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 65 |
Synthetic CaSiO3 sol-gel powder and SPS ceramic derivatives: “In vivo” toxicity assessment |
|
|
| Evgeniy Konstantinovich Papynov,Oleg Olegovich Shichalin,Vladimir Iosifovich Apanasevich,Igor Sergeevich Afonin,Ivan Olegovich Evdokimov,Vitaliy Yurievich Mayorov,Arseniy Sergeevich Portnyagin,Irina Grigorievna Agafonova,Yulia Evgenievna Skurikhina,Mikhael Azarievich Medkov |
|
| Progress in Natural Science: Materials International. 2019; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 66 |
Influence of energy absorbers on Malgaigne fracture mechanism in lumbar-pelvic system under vertical impact load |
|
|
| K. Arkusz,T. Klekiel,G. Slawinski,R. Bedzinski |
|
| Computer Methods in Biomechanics and Biomedical Engineering. 2019; : 1 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 67 |
Plant-Derived Biomaterials: A Review of 3D Bioprinting and Biomedical Applications |
|
|
| Thomas H. Jovic,Garikai Kungwengwe,Adam C. Mills,Iain S. Whitaker |
|
| Frontiers in Mechanical Engineering. 2019; 5 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 68 |
3D Printing Custom Bioactive and Absorbable Surgical Screws, Pins, and Bone Plates for Localized Drug Delivery |
|
|
| Karthik Tappa,Udayabhanu Jammalamadaka,Jeffery Weisman,David Ballard,Dallas Wolford,Cecilia Pascual-Garrido,Larry Wolford,Pamela Woodard,David Mills |
|
| Journal of Functional Biomaterials. 2019; 10(2): 17 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 69 |
Additive Manufacturing for Guided Bone Regeneration: A Perspective for Alveolar Ridge Augmentation |
|
|
| Patrick Rider,Željka Kacarevic,Said Alkildani,Sujith Retnasingh,Reinhard Schnettler,Mike Barbeck |
|
| International Journal of Molecular Sciences. 2018; 19(11): 3308 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 70 |
The Calcaneal Crescent in Patients With and Without Plantar Fasciitis: An Ankle MRI Study |
|
|
| Tim Finkenstaedt,Palanan Siriwanarangsun,Sheronda Statum,Reni Biswas,Karen E. Anderson,Won C. Bae,Christine B. Chung |
|
| American Journal of Roentgenology. 2018; : 1 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 71 |
Morphology and mechanical properties fabricated from Ti, Nb and HA by powder metallurgy method |
|
|
| Farrah Noor Ahmad,Zuhailawati Hussain |
|
| Journal of Physics: Conference Series. 2018; 1082: 012083 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 72 |
Stereolithographic and molding fabrications of hydroxyapatite-polymer gels applicable to bone regeneration materials |
|
|
| Mekuriaw A. Kebede,Karen Sabrina Asiku,Toyoko Imae,Masaru Kawakami,Hidemitsu Furukawa,Chang Mou Wu |
|
| Journal of the Taiwan Institute of Chemical Engineers. 2018; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 73 |
Comparative study of stress characteristics in surrounding bone during insertion of dental implants of three different thread designs: A three-dimensional dynamic finite element study |
|
|
| Chaiwat Udomsawat,Pimduen Rungsiyakull,Chaiy Rungsiyakull,Pathawee Khongkhunthian |
|
| Clinical and Experimental Dental Research. 2018; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 74 |
Preparation and characterization of PCL-coated porous hydroxyapatite scaffolds in the presence of MWCNTs and graphene for orthopedic applications |
|
|
| Aylin M. Deliormanli,Mert Türk,Harika Atmaca |
|
| Journal of Porous Materials. 2018; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 75 |
Influence of scaffold design on 3D printed cell constructs |
|
|
| Auryn Souness,Fernanda Zamboni,Gavin M Walker,Maurice N Collins |
|
| Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2017; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 76 |
Guar gum: A novel binder for ceramic extrusion |
|
|
| M. Elbadawi,M. Mosalagae,I.M. Reaney,J. Meredith |
|
| Ceramics International. 2017; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 77 |
Graphene oxide as a scaffold for bone regeneration |
|
|
| Brian D. Holt,Zoe M. Wright,Anne M. Arnold,Stefanie A. Sydlik |
|
| Wiley Interdisciplinary Reviews: Nanomedicine and Nanobiotechnology. 2016; |
|
| [Pubmed] [Google Scholar] [DOI] |
|
| 78 |
Mechanical and Corrosion Behavior of New Generation Ti-45Nb Porous Alloys Implant Devices |
|
|
| Konda Prashanth,Ksenia Zhuravleva,Ilya Okulov,Mariana Calin,Jürgen Eckert,Annett Gebert |
|
| Technologies. 2016; 4(4): 33 |
|
| [Pubmed] [Google Scholar] [DOI] |
|
